1967 Plymouth Barracuda

Archive for October, 2012

Some pictures of the current status… Oct 2012.

Got the A-833 4-speed installed.  Had to loosen the motor mounts because the engine was not quite centered.  Once the motor mounts were loosened, the transmission was able to be centered and bolted to the crossmember.  The upper crossmember will need to be slightly notched in order to make room for shifting into 2nd gear, a 1/4 inch or so.  Other than that, no real issues.

Making room for the re-popped 4-speed floor hump….

The 4-speed floor hump showed up today from Classic Industries.  Now I just have to measure twice, cut once and weld.  Also, finally picked up the frame side ball stud for the z-bar pedal linkage.  Things are getting closer…