Heater Hoses and Hurst ‘Indy’ Shifter
Home Depot supplied the brass heater hose fitting for the intake and the heater hoses have been installed. Also installed the Temperature Sending Unit and have to figure out how to modify the brass bypass fitting. I attempted to clean up the thermostat housing and it disintegrated under a little sandblasting …. so I’ll be replacing that.
Also, picked up a Hurst ‘Indy’ shifter handle from eBay. Turns out that it’s too long and using it would cause severe knuckle damage when power shifting into 3rd gear… it needed modified. About 2-2 1/2 inches was cut off the end. New holes will be drilled shortly and the new shifter handle will get installed.
Got the PVC, Coil Bracket and Coil and the belts installed. Next, Radiator and hoses.
